Optimate DC

£96.90
Intercom Offer Save 16.66% Learn More

In Stock1-5 working days delivery

Price Match

Learn More

Free UK Delivery

From 1-2 working days

Easy Returns

Learn More
(Save )

Optimate DC

 

OptiMate DC-DC - the Unique battery to battery charger! OptiMate DC-DC draws power from one 12V battery to charge another – No AC power required!

 

OptiMate DC-DC brings you the advanced OptiMate features to places where there is no access to an AC Mains Power supply. Recover, charge and maintain your battery using a larger source battery (ideally 1.5x capacity) without fear of discharging the source thanks to OptiMate's Source Battery Protection.

 

BMS re-activates battery from sleep or deep discharge protection mode.

 

OptiMate DC-DC automatically adapts to the connected battery type – Guarantees healthy lithium or lead-acid batteries!

 

FEATURES

•  For all 12V starter battery types including lead-acid (Pb) > STD (with filler caps), AGM & GEL (sealed VRLA) and Li-Ion made with LiFePO4 / LFP technology
•  Safe to leave connected. Full electronic protection
•  Maintains battery at full charge for good health
•  Low voltage recovery from as low as 2V
•  Tests battery state of health
•  Protects source battery from total discharge
•  Energy saving technology
-  Stand-by power less than 0.5W
-  Efficient 24-7 battery maintenance
•  IP54 weatherproof. Rated for use down to -40°c

 

SPECIFICATION

IDEAL FOR: STD, AGM & GEL 12V batteries from 6Ah and LiFePO4 (LFP) 12.8V/13.2V batteries from 2Ah
CHARGING AMPS: 2A (constant Current)
CHARGING VOLTS: nominal: 12V & 12.8V range: 2V – 14.4V
OPERATION: Fully automatic
STEPS: 6
- Low volt start – BMS reset
- Pulse save
- Controlled charge
- Optimize
- Test after charge
- Maintain 24-7
FEATURES: Charge your 12V lead-acid or 1.28V/13.2V LFP-lithium battery from another 12V battery! No AC power required. Ideal for both lead-acid and LFP (LiFePO4) batteries
USE: Indoor / outdoor (lowest temperature: -40°F / -40°C)
INPUT: 12-16 V, 2.7A max. With source battery protection > low battery warning light and automatic shut-down
STYLE: Weatherproof case with wall mounts, 180cm charge lead ending in SAE connector
SAVE: Low volt start of 2V
SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.
INCLUDED: Fused battery clip set, standard battery clip set & weatherproof battery lead
WARRANTY: 3-year limited replacement warranty.
Manufacturer Part Number: TM500


HOW IT WORKS

1 – Attach the fused clip set to the short input cable (side marked 12 – 16V) and then connect the OptiMate DC-DC to a charged source battery. The OptiMate DC-DC's SAVE and CHARGE LEDs will blink together for 1 minute, indicating it is ready to charge a battery.

2 - Within 1 minute* connect the output charge lead to the battery requiring charge, using the standard clip set or connect directly to the battery that may have the weatherproof battery lead already pre-wired. Charging proceeds when the SAVE or CHARGE LED turn full on.   
*After 1 minute the OptiMate DC-DC turns off if not connected to the battery that needs charging. To re-start, disconnect from the source battery and then once again reconnect.

3 - Wait until the green TEST LED blinks. Charging has been completed! Leave the charger connected for 24/7 long term maintenance.


Click HERE for the OptiMate DC manual.

 

Helmet City is a Genuine UK Optimate Products stockist.

Size One Size
New Releases New Arrivals
Product Name Optimate DC
Brand Optimate
Product Type Accessories
Accessory Type Bike Accessories
Accessory Type (Bike) Electrical Accessories
Colour Black

Customer Questions

Reviews